KleanPal Pro vs. Momcozy D8: Which Bottle Washer Is Best for You?

With the number of bottles and pump parts babies can go through in a day, we get the appeal of a dedicated bottle washer. If you use bottles often or pump regularly, having a machine that handles the washing, sterilizing and drying can mean a lot less time spent at the sink.

We’ve already tested several popular models for our Best Bottle Washers guide, where the Momcozy KleanPal Pro was named our Best Bottle Washer Overall. Now there’s a newer Momcozy option to consider: the Momcozy D8.

Both wash, sterilize and dry feeding gear, but the KleanPal Pro and Momcozy D8 are built for slightly different routines. The $299.99 KleanPal holds up to four bottles, while the $359.99 D8 doubles that capacity and adds more specialized cleaning for pump parts and other hard-to-reach pieces.

In our video review above, Babylist parent Julie loads them up, breaks out the tape measure and shows you how each one works. Read on for what to consider before deciding which one gets a spot on your counter.

First, here’s how they work

If you’ve never used a bottle washer, here’s the quick version: The basic setup is essentially the same for both Momcozy models.

To get started, connect the drain hose to the back of the machine and place the other end in your sink, connect the power cord and fill the removable clean-water tank.

Then, when you’re ready to run a load, add one of the included Momcozy detergent tablets, choose your settings and press start. Both machines pull clean water from their tanks and send the dirty water out through the drain hose. See how a load gets started at 1:10.

Since both need access to a sink or another suitable place for dirty water to drain, keep that in mind when deciding where yours will live.

Counter space matters more than you might think

Before choosing a spot for either washer, it’s worth pulling out the tape measure.

For a rough visual, think of a larger countertop air fryer rather than full-size appliance. The two machines are fairly close in overall size: the KleanPal Pro measures 13.39 inches long by 9.84 inches wide by 16.14 inches high, while the Momcozy D8 measures 13.78 inches long by 10.63 inches wide by 15.35 inches high. See how they compare side by side at 1:51.

If you have upper cabinets, don’t forget to account for the top-opening lids, too. For the KleanPal, you’ll need enough space above the machine to open the lid comfortably when you’re loading and unloading bottles. The Momcozy D8 can open vertically or horizontally, which can be a better fit for lower cabinets.

The Momcozy D8 also has casters and wheels underneath, which come in handy if you need to shift it around on your counter or plan to store it away from the sink. You can unlock them to reposition the machine on a flat surface, then secure it again before use.

Four bottles or eight? That’s the big capacity question

The KleanPal Pro holds up to four bottles plus accessories. The Momcozy D8 holds up to eight bottles plus pump parts.

Double the capacity sounds like an automatic win, but whether you actually need it depends on how you plan to use the washer. If you’re comfortable running several smaller loads throughout the day, the KleanPal’s four-bottle capacity may work just fine. If you’re away from home during the day or would rather tackle bottles in one bigger batch, the Momcozy D8 gives you more breathing room.

That extra space may also be helpful if you’re feeding twins or can see bottles and pump parts piling up quickly. 

Both models accommodate a range of bottle shapes, sizes and materials, including narrow and wide bottles in plastic, silicone and glass. They also offer some loading flexibility: the KleanPal’s top rack can be mounted front or back, while the D8’s can be raised or lowered for different bottle heights. See how the D8 rack adjustment works at 2:54.

If you pump a lot, take a closer look at the D8

Both machines can wash pump parts, so you don’t need the D8 simply because pumping gear is part of your routine. Where the Momcozy D8 goes further is in how it tackles some of the awkward little pieces and irregular inner surfaces of milk collectors. Because milk residue never seems to accumulate in the easiest place to clean, right?

The Momcozy D8’s Pump360 system uses rotating spray jets to direct water around curved pump parts like wearable collection cups, helping reach the little nooks and crannies. It also has targeted cleaning for narrow, hard-to-reach accessories, including compatible pump tubing. See how the pump-part setup works at 3:31.

This is where the extra $60 starts to make more sense for some households. If pump parts, tubing and tiny accessories are going to be regulars in your loads, the Momcozy D8’s more specialized setup may be worth it. If your machine will mostly handle bottles with some pump parts mixed in, the KleanPal Pro could meet your needs.

Both have options for different kinds of loads

It’s surprisingly easy to go from plenty of clean bottles to “wait, how are we almost out?” Both washers have a 19-minute rapid wash when you want to turn around a load quickly.

Beyond that, the KleanPal Pro has nine modes, while the Momcozy D8 has 22. Both give you flexibility to combine washing with steam sterilization, drying and storage, so you don’t have to run the full routine every time. The Momcozy D8 gives you more cycle options overall, while the KleanPal keeps things simpler with fewer choices.

Both can also keep cleaned feeding gear stored inside for up to 72 hours. So if a cycle finishes and unloading it immediately is not remotely at the top of your priority list, your bottles don’t have to come straight out.

The Momcozy D8 helps with its own cleanup, too

Here’s a mildly unfair truth about bottle washers: the machine doing the cleaning still needs to be cleaned. Luckily, the Momcozy D8 makes that part pretty simple.

The KleanPal Pro requires manual descaling, while the Momcozy D8 has a dedicated self-cleaning cycle that flushes the chamber and internal plumbing with hot water. Momcozy recommends adding one of its descaling tablets for better results, then it’s mostly a matter of selecting the setting and letting the machine do its thing. Take a closer look at the self-cleaning setting at 4:42.

You’ll still need to do some occasional upkeep, like cleaning the water inlet and replacing the HEPA filter when needed, but the self-cleaning cycle takes care of a good chunk of the work for you.

So, which Momcozy bottle washer should you choose?

The right one for you really comes down to your feeding routine and how much you want to wash at once.

The KleanPal Pro may make more sense if:

• Four-bottle capacity works for your routine

• You’re okay running smaller loads more often

• You want to spend $299.99 rather than $359.99

• Standard bottle and pump-part cleaning covers what you need

The KleanPal Pro is also already a Babylist-tested favorite. In our bottle washer testing, we liked its cleaning performance, flexible loading and easy-to-use design.

The Momcozy D8 may make more sense if:

• You want room for up to eight bottles at once

• Pump parts and hard-to-reach accessories will make up a lot of your loads

• You’d rather run larger batches instead of washing more frequently

• You’d use extras like the self-cleaning cycle and wheels

Momcozy DeepClean Baby Bottle Washer - White

$359.99

Add to Babylist

Buy

Babylist

$

359.99

Amazon

$

329.99

Target

$

359.99

momcozy.com

$

359.99

Whichever fits your routine, both take one very repetitive job off your hands. And during a stage when there always seems to be another bottle waiting to be washed, getting some of that time back can feel pretty great.

This article is sponsored by Momcozy. Babylist’s free site, apps and emails are made possible by our sponsors. We limit our sponsored content to relevant partners that offer products and services we believe in and use ourselves.